Skip to content

4k Camera Link Line Scan Cameras,Color

MV-CL042-91CCHikrobot

The CL series covers 2K-16K pixels and equipped with GigE/Camera Link/XoF interfaces, support a variety of ISP and algorithms that can fulfill various application needs of line scan cameras. The CL camera supports various ISP functions: Flat field correction, Gamma, LUT, white balance, CCM, SC, etc. to help users obtain higher quality image data; Despite timed exposure, a new acquisition method of trigger-width controlled exposure is added, and with external (soft/hard) trigger signals, it can flexibly adapt to external lighting conditions and exposure control needs. The High-Bandwidth Mode is equipped in the new GigE CL line scan camera. Breaking through the physical bandwidth of the gigabit network, the line frequency can been improved by 1.5-2 times, which provide users with a more cost-effective solution.

Model

Product Model
MV-CL042-91CC
Type
4k Camera Link Line Scan Cameras,Color

Performance

Sensor type
CMOS
Pixel size
7 μm
Sensor size (computed)from resolution × pixel pitch
28.67 × 0.01 mm
Sensor diagonal
28.67 mm
Resolution
4096 × 2
Image mode
Supports 1-line
Max. line rate
40 kHz @ Mono 8 (Base), 50 kHz @ RGB 8 (80-bit), 100 kHz @ Bayer RGBG 8 (Full)
Configuration mode
Mono 8: Base RGB 8: Base, Medium, 80-bit Bayer RGBG 8: Base, Medium, Full
Tap geometry
Mono 8: 1 × RGB 8: 1 ×, 1 × 2, 1 × 10 Bayer RGBG 8: 1 × 2, 1 × 4, 1 × 8
Tap number
Mono 8: 2 Taps RGB 8: 1/2/10 Taps Bayer RGBG 8: 2/4/8 Taps
Pixel clock
40 MHz, 60 MHz, 70 MHz, 85 MHz
Dynamic range
65.6 dB
SNR
40 dB
Gain
Supports 1.0 ×, 1.4 ×, 1.6 ×, 2.4 ×, 3.2 ×
Exposure time
5 μs to 10 ms
Exposure mode
Off/ Once/ Continuous exposure mode; supports fixed time exposure, trigger-width exposure
Mono
Color
Pixel format
Mono 8, RGB 8, Bayer RGBG 8
Binning
Supports 1 × 1, 1 × 2, 1 × 4, 2 × 1, 2 × 2, 2 × 4, 4 × 1, 4 × 2, 4 × 4
Reverse image
Supports horizontal reverse image output
Trigger mode
External trigger, internal trigger
External trigger mode
Line trigger, frame trigger, line + frame trigger

Electrical feature

Data interface
Camera Link (SDR connector); USB interface for updating firmware
Digital I/O
12-pin P10 connector provides power and I/O: configurable input/output × 4 (Line 0/1/3/4) and support single-ended/differential. Camera Link provides I/O (CC1/CC2/CC3/CC4).
Power supply
12 VDC to 24 VDC
Power consumption
Typ. 6.1 W @ 12 VDC

Mechanical

Lens mount
M42*1.0, flange back length 12 mm, applicable to F-mount, C-mount and lens of other types via lens adapter
Dimension
62 mm × 62 mm × 36.9 mm (2.4" × 2.4" × 1.5")
Weight
Approx. 238 g (0.5 lb.)
Ingress protection
IP40 (under proper lens installation and wiring)
Temperature
Working temperature: –20 °C to 55 °C (–4 °F to 131 °F) Storage temperature : –30 °C to 80 °C (–22 °F to 176 °F)
Humidity
5% RH to 95% RH (no condensation)

General

Client software
MVS and frame grabber software meeting with Camera Link Protocol
Operating system
32/64-bit Windows 7/10, 64-bit Windows 11
Compatibility
Camera Link V2.1, GenICam
Certification
CE, RoHS, KC

Firmware

Choosing a lens

Choosing a lens

Solve for
Focal length
86 mm
Magnification: 0.29×
Resolution per pixel
0.0408 mm/px
Smallest detectable feature: 0.123 mm

The formula holds for standard (entocentric) lenses and assumes the working distance is much larger than the focal length. It does not apply to telecentric lenses, and it accounts for neither depth of field nor distortion.

Data cables the manufacturer lists

Frame grabbers

Lenses that fit this camera

Filtered by the M42-mount thread and by coverage — the image circle is at least 28.67 mm, this sensor's diagonal. A smaller circle darkens the corners of every frame. Ask us to confirm