5MP Area Scan Camera,GigE,IMX264,Mono,PRO

Name: 5MP Area Scan Camera,GigE,IMX264,Mono,PRO
Brand: Hikrobot
SKU: MV-CS050-10GM-PRO

MV-CS050-10GM-PROHikrobotSensor: IMX264 Global shutter →

Request a quote Datasheet PDF Manual CAD drawing

The new second-generation CS series industrial cameras are equipped with excellent image sensors, high dynamic range, good signal-to-noise ratio, excellent image quality, excellent power consumption design, compatible with machine vision standard protocols and GenlCam standards, and seamlessly connect with third-party software. New-generation appearance structure, four-sided installation support, wider voltage access, wider temperature width, better adapt to complex visual application scenarios. The camera has built-in a variety of complex algorithms and functions, such as lossless compression, 2D noise reduction, lens shading correction, CCM, etc., which can improve the camera image quality in all directions, while ensuring the camera has a higher frame rate and more excellent quality.

Model

Product Model: MV-CS050-10GM-PRO
Type: 5MP Area Scan Camera,GigE,IMX264,Mono,PRO

Performance

Sensor type: CMOS, global shutter
Sensor model: Sony® IMX264
Pixel size: 3.45 μm × 3.45 μm
Sensor size: 2/3"
Sensor size (computed)from resolution × pixel pitch: 8.45 × 7.07 mm
Sensor diagonal: 11.01 mm
Resolution: 2448 × 2048
Max. frame rate: 24.2 fps @ 2448 × 2048 35.6 fps @ 2448 × 2048 (image compression mode enabled)
SNR: 40 dB
Gain: 0 dB to 24 dB
Exposure time: UltraShort exposure mode: 1 μs to 14 μs Standard exposure mode: 15 μs to 10 sec
Exposure mode: Off/Once/Continuous exposure mode
Mono: Mono
Pixel format: Mono 8/10/10p/12/12p
Binning: Supports 1 × 1, 2 × 2, 4 × 4
Decimation: Supports 1 × 1, 2 × 2
Reverse image: Supports horizontal and vertical reverse image output

Electrical feature

Data interface: Gigabit Ethernet, compatible with Fast Ethernet
Digital I/O: 6-pin Hirose connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2).
Power supply: 9 VDC to 24 VDC, supports PoE
Power consumption: Typ. 2.6 W@12 VDC

Mechanical

Lens mount: C-mount
Dimension: 29 mm × 29 mm × 42 mm (1.1" × 1.1" × 1.2")
Weight: Approx. 100 g (0.22 lb.)
Ingress protection: IP40 (under proper lens installation and wiring)
Temperature: Working temperature: –30 °C to 60 °C (–22 °F to 140 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F)
Humidity: 20% RH to 95% RH (no condensation)

General

Client software: MVS or third-party software meeting with GigE Vision Protocol
Operating system: 32/64-bit Windows 7/10, 32/64-bit Linux
Compatibility: GigE Vision V2.0, GenICam
Certification: CE, RoHS, KC

EMVA data（typical）

Quantum efficiency: 64.6%
Dark noise: 2.1e-@10-bit
Signal-to-noise ratio: 39.8 dB
Saturation capacity: 9.6 ke-
Dynamic range: 71.0 dB

Firmware

MV_CS050_10GM_PRO_B_STD_V4.1.5_251106_HIKROBOT.zip →

Choosing a lens

Solve for

Sensor widthmmFrom the datasheet, not the inch format nameWorking distancemmField of viewmmPixels acrosspx

Focal length

25.4 mm

Magnification: 0.084×

Resolution per pixel

0.0408 mm/px

Smallest detectable feature: 0.123 mm

The formula holds for standard (entocentric) lenses and assumes the working distance is much larger than the focal length. It does not apply to telecentric lenses, and it accounts for neither depth of field nor distortion.

Lenses that fit this camera

Filtered by the C-mount thread and by coverage — the image circle is at least 11.01 mm, this sensor's diagonal. A smaller circle darkens the corners of every frame. Ask us to confirm