Skip to content

2MP Area Scan Camera, GigE, IMX430, Mono

The new second-generation CS series industrial cameras are equipped with excellent image sensors, high dynamic range, good signal-to-noise ratio, excellent image quality, excellent power consumption design, compatible with machine vision standard protocols and GenlCam standards, and seamlessly connect with third-party software. New-generation appearance structure, four-sided installation support, wider voltage access, wider temperature width, better adapt to complex visual application scenarios. The camera has built-in a variety of complex algorithms and functions, such as lossless compression, 2D noise reduction, lens shading correction, CCM, etc., which can improve the camera image quality in all directions, while ensuring the camera has a higher frame rate and more excellent quality.

Model

Product Model
MV-CS020-10GM
Type
2MP Area Scan Camera, GigE, IMX430, Mono

Performance

Sensor type
CMOS, global shutter
Sensor model
Sony® IMX430
Pixel size
4.5 μm × 4.5 μm
Sensor size
1/1.7"
Sensor size (computed)from resolution × pixel pitch
7.31 × 5.58 mm
Sensor diagonal
9.19 mm
Resolution
1624 × 1240
Max. frame rate
60 fps @1624 × 1240 Mono 8
Dynamic range
72.1 dB
SNR
43.8 dB
Gain
0 dB to 24 dB
Exposure time
UltraShort exposure mode: 1 μs to 5 μs Standard exposure mode: 6 μs to 10 sec
Exposure mode
Off/Once/Continuous exposure mode
Mono
Mono
Pixel format
Mono 8/10/10Packed/12/12Packed
Binning
Supports 1 × 1, 2 × 2
Decimation
Supports 1 × 1, 2 × 2
Reverse image
Supports horizontal and vertical reverse image output

Electrical feature

Data interface
Gigabit Ethernet, compatible with Fast Ethernet
Digital I/O
6-pin P7 connector provides power and I/O, including opto-isolated input × 1 (Line 0), opto-isolated output × 1 (Line 1), bi-directional non-isolated I/O × 1 (Line 2).
Power supply
9 VDC to 24 VDC, supports PoE
Power consumption
Typ. 2.8 W@12 VDC

Mechanical

Lens mount
C-mount
Dimension
29 mm × 29 mm × 42 mm (1.1" × 1.1" × 1.2")
Weight
Approx. 100 g (0.22 lb.)
Ingress protection
IP40 (under proper lens installation and wiring)
Temperature
Working temperature: –30 °C to 60 °C (–22 °F to 140 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F)
Humidity
20% RH to 95% RH (no condensation)

General

Client software
MVS or third-party software meeting with GigE Vision Protocol
Operating system
32/64-bit Windows 7/10, 32/64-bit Linux
Compatibility
GigE Vision V2.0, GenICam
Certification
CE, RoHS, KC

Firmware

Choosing a lens

Choosing a lens

Solve for
Focal length
21.9 mm
Magnification: 0.073×
Resolution per pixel
0.0408 mm/px
Smallest detectable feature: 0.123 mm

The formula holds for standard (entocentric) lenses and assumes the working distance is much larger than the focal length. It does not apply to telecentric lenses, and it accounts for neither depth of field nor distortion.

Lenses that fit this camera

Filtered by the C-mount thread and by coverage — the image circle is at least 9.19 mm, this sensor's diagonal. A smaller circle darkens the corners of every frame. Ask us to confirm

Data cables that fit

Matched on connector and protocol from the manufacturer's catalogue — not its own recommendation list. Ask us to confirm

Power and I/O cables that fit

Matched on connector and protocol from the manufacturer's catalogue — not its own recommendation list. Ask us to confirm