Skip to content

SC3000X series vision sensor,6MP,Mono,12mm focal length

MV-SC3060XM-12M-WBNHikrobotRolling shutter

5–12 MP Smart Cameras — 12 mm, Rolling shutter, CMOS, M12-mount

Model

Product Model
MV-SC3060XM-12M-WBN
Type
SC3000X series vision sensor,6MP,Mono,12mm focal length

Tool

Vision tool
Measurement: P2P measurement, P2L measurement, contrast measurement, grayscale size, edge width measurement, width measurement, brightness average value, L2L angle, diameter measurement, line angle Existence: Spot existence, edge existence, contour existence, pattern existence, circle existence, line existence, anomaly judge, existence detection Count: Spot count, edge count, contour count, pattern count, learning-based count Recognition: Multi-object count, code recognition, category recognition, classification registration, object registration, OCR, learning-based OCR, character horizontal stripe detection Logic: Calculator, if module, logic judge, format output, condition judge, character comparison, combination judge Location: Calibration convert, single point alignment, point rectify, point grasp, scale transformation, fixture Deep learning: DL classification, DL object detection Defect detection: Anomaly detection Industry tools: OCR and defect detection
Solution capacity
Supports importing and exporting solutions, up to 32 solutions can be stored.
Communication protocol
RS-232, TCP, UDP, FTP, PROFINET, Modbus, EtherNet/IP, MELSEC/SLMP, FINS, Keyence KV

Camera

Sensor type
CMOS, rolling shutter
Pixel size
2 μm × 2 μm
Sensor size
1/2.4"
Sensor size (computed)from resolution × pixel pitch
6.4 × 3.84 mm
Sensor diagonal
7.46 mm
Resolution
3200 × 1920
Max. frame rate
20 fps
Gain
0 dB to 33 dB
Exposure time
540 μs to 200 ms
Pixel format
Mono 8
Mono/color
Mono

Electrical feature

Data interface
Fast Ethernet (100 Mbit/s)
Digital I/O
12-pin M12 connector provides power and I/O, including isolated input (Line 0/1/2) × 3, isolated output (Line 3/4/5) × 3, RS-232 × 1 Supports device triggering via pressing top trigger button
Power supply
12 VDC to 24 VDC
Power consumption
Avg.: 6.6 W @ 24 VDC (light source enabled) Max.: 22 W @ 24 VDC (light source enabled)

Mechanical

Lens mount
M12-mount, mechanical focus supported
Focal length
12 mm
Lens cap
Half-polarized lens cap by default. Transparent or fully-polarized lens cap is optional.
Light source
Focused white light by default. Red, blue, IR, or UV light is optional.
Aiming system
2 LEDs
Indicator
360° visual indicator
Dimension
Straight angle: 80.1 mm × 43 mm × 43.5 mm (3.2" × 1.7" × 1.7") Right angle: 58.5 mm × 43 mm × 64.6 mm (2.3" × 1.7" × 2.5")
Weight
Approx. 190 g (0.4 lb.)
Ingress protection
IP67 (under proper installation of waterproof lens cap)
Temperature
Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: -30 °C to 70 °C (-22 °F to 158 °F)
Humidity
20% RH to 95% RH (no condensation)
Vibration resistance
Meets standard IEC 60068-2-6:2007. Device only (without installation bracket): 10 Hz to 55 Hz, 1.5 mm peak-to-peak amplitude, 2 hours per axis (X, Y, Z)
Shock resistance
Meets standard IEC 60068-2-27:2008. Device only (without installation bracket): 30 g / 11 ms, half-sine wave, 500 shocks per axis (6 directions)

General

Client software
SCMVS
Certification
CE, KC

Firmware

Choosing a lens

Choosing a lens

Solve for
Focal length
19.2 mm
Magnification: 0.064×
Resolution per pixel
0.0408 mm/px
Smallest detectable feature: 0.123 mm

The formula holds for standard (entocentric) lenses and assumes the working distance is much larger than the focal length. It does not apply to telecentric lenses, and it accounts for neither depth of field nor distortion.

Power adapters

Lenses that fit this camera

Filtered by the M12-mount thread and by coverage — the image circle is at least 7.46 mm, this sensor's diagonal. A smaller circle darkens the corners of every frame. Ask us to confirm

Data cables that fit

Matched on connector and protocol from the manufacturer's catalogue — not its own recommendation list. Ask us to confirm