Skip to content

SC3000X series vision sensor,5MP,Color,12mm focal length,One Cable

MV-SC3050XC-12M-WBN-SHikrobotGlobal shutter

2–5 MP Smart Cameras — 12 mm, Global shutter, CMOS, M12-mount

Model

Product Model
MV-SC3050XC-12M-WBN-S
Type
SC3000X series vision sensor,5MP,Color,12mm focal length,One Cable

Tool

Vision tool
Measurement: P2P measurement, P2L measurement, contrast measurement, grayscale size, edge width measurement, width measurement, brightness average value, L2L angle, color measurement, color size, diameter measurement, line angle Existence: Spot existence, edge existence, contour existence, pattern existence, circle existence, line existence, anomaly judge, existence detection Count: Spot count, edge count, contour count, pattern count, learning-based count, color count Recognition: Multi-object count, code recognition, color contrast, color recognition, category recognition, classification registration, object registration, OCR, learning-based OCR, character horizontal stripe detection Logic: Calculator, if module, logic judge, format output, condition judge, character comparison, combination judge Location: Calibration convert, single point alignment, point rectify, point grasp, scale transformation, fixture Deep learning: DL classification, DL object detection Defect detection: Anomaly detection Industry tools: OCR and defect detection
Solution capacity
Supports importing and exporting project, up to 32 projects can be stored
Communication protocol
RS-232, TCP, UDP, FTP, PROFINET, ModBus, EtherNet/IP, MELSEC/SLMP, FINS, Keyence KV

Camera

Sensor type
CMOS, global shutter
Pixel size
3.45 μm × 3.45 μm
Sensor size
1/1.45"
Sensor size (computed)from resolution × pixel pitch
8.39 × 7.07 mm
Sensor diagonal
10.97 mm
Resolution
2432 × 2048
Max. frame rate
40 fps
Gain
0 dB to 15 dB
Exposure time
6 μs to 1 sec
Pixel format
RGB 8, Mono 8
Mono/color
Color

Electrical feature

Data interface
Fast Ethernet (100 Mbit/s)
Digital I/O
17-pin M12 connector provides power and I/O, including opto-isolated input (LINE 0/1/2) × 3, opto-isolated output (LINE 3/4/5) × 3, and RS-232 × 1 Supports triggering device via pressing top trigger button
Power supply
24 VDC
Power consumption
Avg. 7 W @ 24 VDC (light source enabled) Max. 22 W @ 24 VDC (light source enabled)

Mechanical

Lens mount
M12-mount, mechanical autofocus supported
Focal length
12 mm
Lens cap
Polarized + diffuser + full-transparent lens cap
Light source
White spot light source. Red/blue/IR point light source is optional
Aiming system
1 LED
Indicator
Multi-angle visual indicator
Dimension
43 mm × 57 mm × 45.9 mm (1.7" × 2.2" × 1.8")
Weight
Approx. 200 g (0.4 lb.)
Ingress protection
IP65
Temperature
Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F)
Humidity
20% RH to 95% RH (no condensation)
Vibration resistance
Meets standard IEC 60068-2-6:2007. Device only (without installation bracket): 10 Hz to 55 Hz, 1.5 mm peak-to-peak amplitude, 2 hours per axis (X, Y, Z)
Shock resistance
Meets standard IEC 60068-2-27:2008. Bare device withstands 30 g / 11 ms, half-sine wave, 500 shocks per axis (6 directions)

General

Client software
SCMVS
Certification
CE, KC

Firmware

Choosing a lens

Choosing a lens

Solve for
Focal length
25.2 mm
Magnification: 0.084×
Resolution per pixel
0.0408 mm/px
Smallest detectable feature: 0.123 mm

The formula holds for standard (entocentric) lenses and assumes the working distance is much larger than the focal length. It does not apply to telecentric lenses, and it accounts for neither depth of field nor distortion.

Power adapters

Data cables that fit

Matched on connector and protocol from the manufacturer's catalogue — not its own recommendation list. Ask us to confirm