Skip to content

SC3000 series vision sensor,5MP,Mono,8mm focal length

MV-SC3050M-08M-WBNV4HikrobotGlobal shutter

2–5 MP Smart Cameras — 8 mm, Global shutter, CMOS, M12-mount

Model

Product Model
MV-SC3050M-08M-WBN V4
Type
SC3000 series vision sensor,5MP,Mono,8mm focal length

Tool

Vision tool
Measurement: P2P measurement, P2L measurement, contrast measurement, grayscale size, edge width measurement, width measurement, brightness average value, L2L angle, diameter measurement, line angle Existence: Spot existence, edge existence, contour existence, pattern existence, circle existence, line existence, anomaly judge, existence detection Count: Spot count, edge count, contour count, pattern count, learning-based count Recognition: Multi-object count, code recognition, category recognition, classification registration, object registration, OCR, learning-based OCR, character horizontal stripe detection Logic: Calculator, if module, logic judge, format output, condition judge, character comparison, combination judge Location: Calibration convert, single point alignment, point rectify, point grasp, scale transformation, fixture Deep learning: DL classification, DL object detection Defect detection: Anomaly detection Industry tools: OCR and defect detection
Solution capacity
Supports importing and exporting project, up to 32 projects can be stored
Communication protocol
RS-232, TCP, UDP, FTP, PROFINET, Modbus, EtherNet/IP, MELSEC/SLMP, FINS, Keyence KV

Camera

Sensor type
CMOS, global shutter
Pixel size
3.4 μm × 3.4 μm
Sensor size
2/3"
Sensor size (computed)from resolution × pixel pitch
8.27 × 6.96 mm
Sensor diagonal
10.81 mm
Resolution
2432 × 2048
Max. frame rate
50 fps
Gain
0 dB to 24 dB
Exposure time
60 μs to 1 sec
Pixel format
Mono 8
Mono/color
Mono

Electrical feature

Data interface
Fast Ethernet (100 Mbit/s)
Digital I/O
17-pin M12 connector provides power, Ethernet, digital I/O, and serial port: Input signal × 2 (Line 0/1), output signal × 3 (Line 5/6/7), bi-directional I/O × 3 (Line 2/3/4), and external button input × 1. Output signal can be set as NPN or PNP.
Power supply
24 VDC
Power consumption
Avg. 9.6 W @ 24 VDC Max. 48 W @ 24 VDC

Mechanical

Lens mount
M12-mount, mechanical autofocus lens
Focal length
8 mm
Lens cap
Transparent lens cap by default. Half-polarized and fully-polarized caps are optional
Light source
14 LED lamps, white light by default. Red, blue, and near infrared lights are optional
Indicator
Power indicator (PWR), network indicator (LNK), status indicator (STS), result indicator (OK/NG)
Dimension
65.2 mm × 65.2 mm × 47 mm (2.6" × 2.6" × 1.9")
Weight
Approx. 280 g (0.6 lb.)
Ingress protection
IP67 (under proper installation of lens and wiring)
Temperature
Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F)
Humidity
20% RH to 95% RH (no condensation)
Shock resistance
Meets standard IEC 60068-2-27:2008. Device only (without installation bracket): 30 g / 11 ms, half-sine wave, 500 shocks per axis (6 directions)
Vibration resistance
Meets standard IEC 60068-2-6:2007. Device only (without installation bracket): 10 Hz to 55 Hz, 1.5 mm peak-to-peak amplitude, 2 hours per axis (X, Y, Z)

General

Client software
SCMVS
Certification
CE, KC

Firmware

Choosing a lens

Choosing a lens

Solve for
Focal length
24.8 mm
Magnification: 0.083×
Resolution per pixel
0.0408 mm/px
Smallest detectable feature: 0.123 mm

The formula holds for standard (entocentric) lenses and assumes the working distance is much larger than the focal length. It does not apply to telecentric lenses, and it accounts for neither depth of field nor distortion.

Power adapters

Data cables that fit

Matched on connector and protocol from the manufacturer's catalogue — not its own recommendation list. Ask us to confirm