SC2000X series vision sensor，1.3MP，Mono，16mm focal length

Name: SC2000X series vision sensor，1.3MP，Mono，16mm focal length
Brand: Hikrobot
SKU: MV-SC2013XM-16M-WBN

MV-SC2013XM-16M-WBNHikrobotGlobal shutter →

Request a quote Datasheet PDF Protocol (PDF)CAD drawing

1–2 MP Smart Cameras — 16 mm, Global shutter, CMOS, M12-mount

Model

Product Model: MV-SC2013XM-16M-WBN
Type: SC2000X series vision sensor，1.3MP，Mono，16mm focal length

Tool

Vision tool: Measurement: P2P measurement, P2L measurement, contrast measurement, grayscale size, edge width measurement, width measurement, brightness analysis, L2L angle, diameter measurement, line angle Existence: Existence detection, anomaly judge, spot existence, edge existence, contour existence, pattern existence, circle existence, line existence Count: Learning-based count, spot count, edge count, contour count, pattern count Recognition: Multi-object count, category recognition, code recognition, OCR Logic: Calculator, if module, logic judge, condition judge, string comparison, combination judge, format output Defect detection: Anomaly detection Location: Calibration convert, single point alignment, point rectify, point grasp, scale transformation, fixture
Solution capacity: Supports solution importing and exporting, up to 16 solutions and 40 modules can be stored.
Communication protocol: RS-232, TCP, UDP, FTP, PROFINET, Modbus, EtherNet/IP, MELSEC/SLMP, FINS, Keyence KV

Performance

Sensor type: CMOS, global shutter
Pixel size: 2.7 μm × 2.7 μm
Sensor size: 1/4"
Sensor size (computed)from resolution × pixel pitch: 3.46 × 2.76 mm
Sensor diagonal: 4.43 mm
Resolution: 1280 × 1024
Max. frame rate: 55 fps
Gain: 0 dB to 29 dB (analog gain)
Exposure time: 35 μs to 100 ms
Pixel format: Mono 8
Mono/color: Mono

Electrical feature

Data interface: Fast Ethernet (100 Mbit/s)
Digital I/O: 17-pin M12 connector provides power and I/O, including isolated input (Line 0/1) × 2, isolated output (Line 2/3) × 2, RS-232 × 1 Supports device triggering via pressing side button.
Power supply: 24 VDC
Power consumption: Avg.: 5 W @ 24 VDC (light source enabled) Max.: 12 W @ 24 VDC (light source enabled)

Mechanical

Lens mount: M12-mount, mechanical autofocus supported
Focal length: 16 mm
Lens cap: Transparent lens cap by default. Half-polarized and fully-polarized caps are optional.
Light source: White light by default. Red, blue, IR, UV, and two-color (red/blue) lights are optional.
Aiming system: 2 green LED lights
Indicator: Power indicator (PWR), network indicator (LNK), result indicator (OK/NG), user-defined indicator (U1)
Dimension: Straight angle: 72.7 mm × 31.5 mm × 41 mm (2.9" × 1.2" × 1.6") Right angle: 51.5 mm × 31.5 mm × 61 mm (2.0" × 1.2" × 2.4")
Weight: 118 g (0.3 lb.)
Ingress protection: IP65
Temperature: Working temperature: 0 °C to 50 °C (32 °F to 122 °F) Storage temperature: –30 °C to 70 °C (–22 °F to 158 °F)
Humidity: 20% RH to 95% RH (no condensation)
Vibration resistance: Meets standard IEC 60068-2-6:2007. Device only: 10 Hz to 55 Hz, 1.5 mm peak-to-peak amplitude, 2 hours per axis (X, Y, Z)
Shock resistance: Meets standard IEC 60068-2-27:2008. Device only: 30 g / 11 ms, half-sine wave, 500 shocks per axis (6 directions)

General

Client software: SCMVS
Certification: CE, KC

Firmware

MV_SC2013XM_XXM_WBN_GML_STD_V4.3.6_260701.zip →

Choosing a lens

Solve for

Sensor widthmmFrom the datasheet, not the inch format nameWorking distancemmField of viewmmPixels acrosspx

Focal length

10.4 mm

Magnification: 0.035×

Resolution per pixel

0.0408 mm/px

Smallest detectable feature: 0.123 mm

The formula holds for standard (entocentric) lenses and assumes the working distance is much larger than the focal length. It does not apply to telecentric lenses, and it accounts for neither depth of field nor distortion.

Lenses that fit this camera

Filtered by the M12-mount thread and by coverage — the image circle is at least 4.43 mm, this sensor's diagonal. A smaller circle darkens the corners of every frame. Ask us to confirm