# MV-CL161-41CM — 16k Camera Link Line Scan Cameras，Mono

> The CL series covers 2K-16K pixels and equipped with GigE/Camera Link/XoF interfaces, support a variety of ISP and algorithms that can fulfill various application needs of line scan cameras. The CL camera supports various ISP functions: Flat field correction, Gamma, LUT, white balance, CCM, SC, etc. to help users obtain higher quality image data; Despite timed exposure, a new acquisition method of trigger-width controlled exposure is added, and with external (soft/hard) trigger signals, it can flexibly adapt to external lighting conditions and exposure control needs. The High-Bandwidth Mode is equipped in the new GigE CL line scan camera. Breaking through the physical bandwidth of the gigabit network, the line frequency can been improved by 1.5-2 times, which provide users with a more cost-effective solution.

- **Model:** MV-CL161-41CM
- **Manufacturer:** Hikrobot
- **Category:** [Line Scan Cameras](https://www.innosmart.bg/en/catalog/line-scan-cameras) — `line-scan-cameras`, [.md](https://www.innosmart.bg/en/catalog/line-scan-cameras.md)
- **Subcategory:** [Line Scan Cameras](https://www.innosmart.bg/en/catalog/line-scan-cameras/line-scan-cameras) — `line-scan-cameras`, [.md](https://www.innosmart.bg/en/catalog/line-scan-cameras/line-scan-cameras.md)
- **Status:** `delisting` — still sold, but being withdrawn by the manufacturer
- **Datasheet PDF:** https://www.innosmart.bg/api/catalog/asset/datasheet/d3/d3cbe0eff5376ea98d364064ad5573d62242c2ed0a49184245bc642273eea665.pdf
- **Manual:** https://www.innosmart.bg/api/catalog/asset/manual/3b/3bdb439cadf9d0f7f8bb9e1b5e41db3124e41324f0b007dfcb07fa1697d3f73f.pdf
- **CAD drawing:** https://www.innosmart.bg/api/catalog/asset/drawing/1b/1bfe5cc5db97eeb3f333f112e93d0562fea657f53c55bcebaa84934846adf753.zip
- **HTML page:** https://www.innosmart.bg/en/catalog/product/by-id/MV-CL161-41CM
- **Request a quote:** https://www.innosmart.bg/en/contact?product=MV-CL161-41CM

Prices and stock levels are not published; for a quote use the enquiry link above.

## Key parameters

| Parameter | Value | Key |
|---|---|---|
| Resolution (pixels × lines) | 16384 × 1 px | `resolution` |
| Pixels per line | 16384 px | `width_px` |
| Lines | 1 | `lines` |
| Pixel size | 3.5 µm | `pixel_size_um` |
| Line rate | 10 kHz (Base), 20 kHz (Medium), 40 kHz (Full), and 50 kHz (80-bit) | `line_rate` |
| Interface | Camera Link | `interface` |
| Mount | M72-mount | `mount` |

Values are read from the table below. A parameter is absent when the manufacturer does not state it, or does not state it as one value — it is then only in the table.

## Specifications

### Model

| Parameter | Value |
|---|---|
| Product Model | MV-CL161-41CM |
| Type | 16k Camera Link Line Scan Cameras，Mono |

### Performance

| Parameter | Value |
|---|---|
| Sensor type | CMOS |
| Pixel size | 3.5 μm |
| Resolution | 16384 × 1 |
| Image mode | 1-line |
| Max. line rate | 10 kHz (Base), 20 kHz (Medium), 40 kHz (Full), and 50 kHz (80-bit) |
| Configuration mode | Base, Medium, Full, 80-bit |
| Tap geometry | 1 × 2, 1 × 4, 1 × 8, 1 × 10 |
| Tap number | 2 Taps, 4 Taps, 8 Taps, 10 Taps |
| Pixel clock | 40 MHz, 66 MHz, 80 MHz, 85 MHz |
| Dynamic range | 64.7 dB |
| SNR | 44.3 dB |
| Gain | Supports 1 ×, 2 ×, 4 ×, 8 × |
| Exposure time | 2 μs to 10 ms |
| Exposure mode | Off/ Once/ Continuous exposure mode; supports fixed exposure time, trigger-width exposure |
| Mono | Mono |
| Pixel format | Mono 8/10/12 |
| Binning | Supports 1 × 1, 2 × 2, 4 × 4 |
| Reverse image | Supports horizontal reverse image output |
| Trigger mode | External trigger, internal trigger |
| External trigger mode | Line trigger, frame trigger, line + frame trigger |

### Electrical feature

| Parameter | Value |
|---|---|
| Data interface | Camera Link (SDR connector); USB interface for updating firmware |
| Digital I/O | 12-pin P10 connector provides power and I/O: configurable input and output × 4 (Line 0/1/3/4), and support single-end/differential. Camera Link provides I/O (CC1/CC2/CC3/CC4). |
| Power supply | 12 VDC to 24 VDC |
| Power consumption | Typ. 7.2 W @ 12 VDC |

### Mechanical

| Parameter | Value |
|---|---|
| Lens mount | M72*0.75, flange back length 12 mm, applicable to F-mount via lens adapter |
| Dimension | 76 mm × 76 mm × 42.1 mm (3.0" × 3.0" × 1.7") |
| Weight | Approx. 320 g (0.7 lb.) |
| Ingress protection | IP40 (under proper lens installation and wiring) |
| Temperature | Working temperature: 0 °C to 55 °C (32 °F to 131 °F) Storage temperature: –30 °C to 80 °C (–22 °F to 176 °F) |
| Humidity | 5% RH to 90% RH (no condensation) |

### General

| Parameter | Value |
|---|---|
| Client software | MVS and frame grabber software meeting with Camera Link Protocol |
| Operating system | 32/64-bit Windows 7/10, 64-bit Windows 11 |
| Compatibility | Camera Link V1.2, GenICam |
| Certification | CE, RoHS, KC |

## Firmware

- [MV_CL161_41CM_STD_V2.0.14_221122_HIKROBOT.zip](https://www.innosmart.bg/api/catalog/asset/firmware/ab/ab3c3a672d74ef1b22488a04c5c75d2fd98108a13e0778fb7af0e1ba6d1da42e.zip)
- [MV_CL161_41CM_NEU_V2.0.14_221122.zip](https://www.innosmart.bg/api/catalog/asset/firmware/eb/eb9dd91d3b9e9a8c303731a2d03bc6d86114809f7e378cb693efc232e7b0a91e.zip)

---

Source: the innoSMART Automation catalogue (Hikrobot, Daheng Imaging and Chipsee). Specifications are the manufacturer's own, in English.