# MV-ACCL-SDR-SDR-AOC-20M-FULL — MV-ACCL-SDR-SDR-AOC-20m-Full

> Camera Link Cables & Accessories — SDR26, 20 m, Drag chain

- **Model:** MV-ACCL-SDR-SDR-AOC-20M-FULL
- **Manufacturer:** Hikrobot
- **Category:** [Cables & Accessories](https://www.innosmart.bg/en/catalog/cables-accessories) — `cables-accessories`, [.md](https://www.innosmart.bg/en/catalog/cables-accessories.md)
- **Subcategory:** [Cables & Accessories](https://www.innosmart.bg/en/catalog/cables-accessories/cables-accessories) — `cables-accessories`, [.md](https://www.innosmart.bg/en/catalog/cables-accessories/cables-accessories.md)
- **Status:** `active` — sold
- **Datasheet PDF:** https://www.innosmart.bg/api/catalog/asset/datasheet/13/13a51f5b348b74001da7241b4fc68a3de701e728cb44e215b512a26a310191a0.pdf
- **HTML page:** https://www.innosmart.bg/en/catalog/product/by-id/MV-ACCL-SDR-SDR-AOC-20M-FULL
- **Request a quote:** https://www.innosmart.bg/en/contact?product=MV-ACCL-SDR-SDR-AOC-20M-FULL

Prices and stock levels are not published; for a quote use the enquiry link above.

## Key parameters

| Parameter | Value | Key |
|---|---|---|
| Interface | Camera Link | `cable_interface` |
| End A | SDR26 | `end_a` |
| End B | SDR26(Board side with Type A USB3.0 power take-off connector) | `end_b` |
| Length | 20 m | `length_m` |
| Cable movement | Drag chain | `flex_class` |

Values are read from the table below. A parameter is absent when the manufacturer does not state it, or does not state it as one value — it is then only in the table.

## Specifications

### Model

| Parameter | Value |
|---|---|
| Product Model | MV-ACCL-SDR-SDR-AOC-20m-Full |
| Type | MV-ACCL-SDR-SDR-AOC-20m-Full |

### Physical specification

| Parameter | Value |
|---|---|
| End A connector | SDR26 |
| End B connector | SDR26(Board side with Type A USB3.0 power take-off connector) |
| Cable diameter | 5.6 ± 0.2 mm |
| Length | 20m |
| Cable mechanical | Fiber*2C+(37/0.1)*1C+AL+B |
| Jacket | TPU |
| Cable color | Black |
| Connector durability | 1000 cycles |
| Min. bending radius | When installed: 100 mm When used: 67.2 mm |
| Allowable tensile force | When installed: 300 N When used: 150 N |
| Allowable crushing force | Long term: 200 N/100 mm Short term: 350 N/100 mm |
| Applicable scenario | Drag chain |
| Max. U-type bending cycles | 5 million times |

### Electrical specification

| Parameter | Value |
|---|---|
| Power supply | 5 V-600 mA |

### Additional information

| Parameter | Value |
|---|---|
| Working temperature | 0°C ~ 70°C |
| Packaging | Individual package and paper box |

---

Source: the innoSMART Automation catalogue (Hikrobot, Daheng Imaging and Chipsee). Specifications are the manufacturer's own, in English.
